Precision Mask consists of an extra-thin and strong paper backing coated with an acrylic adhesive. The combination of the highly equipped backing material and the outstanding special adhesive formulation allows easy removability up to 6 months Indoors and 8 weeks Outdoors after application. This enables multiple working processes in only one covering process.

This tape is suited for almost all indoor and outdoor painting applications.

Precision Mask is suitable for use with water-based paints and lacquers and even for spatula application techniques.
It is suitable for a variety of common surfaces such as glass, aluminium, hard-PVC and wood.
It is especially suited for applications when a precise razor-sharp paint edge is needed.

• Indoor masking (up to 6 months)
• Outdoor masking (up to 8 weeks)
• For use on smooth and slightly textured surfaces
• For high-quality painting and lacquering work
• For spray painting with afterwards oven drying up to 120°C/30 min

Available in widths of 19, 25,38 & 50

50m in length

A guide of adhesive tape application

To guarantee optimum adhesion, surfaces to be bonded must be clean, dry and grease free. Anti-adhesive substances on surfaces, such as dust, grease or wax-based silicone polishes must be removed before bonding.

Application of adhesive tapes

An adhesive tape should stick after application of moderate pressure at ambient temperature (18C - 25C). To obtain maximum initial adhesion, even pressure should be applied. The earliest way of achieving this is by finger pressure or using a small hand roller. In both cases, firm pressure should be applied along the entire length of the tape. If the adhesive bond or seal is not suitable for the application, please contact us for information on an alternative product.

Disclaimer
Adhesive Brokers Limited do not accept and liability for loss or damage arising directly or indirectly from the use of these products. Customers should satisfy themselves by appropriate trials that each product is suitable for its intended use.